Over the last two weekends, I did a few important changes to the Infiniti G35 coupe. The original coupe came with a set of 20 inch aftermarket wheels and tires (Figure 1). So I procured the original 19 inch Forged Rays (Figure 6) from a seller about a hundred miles away a few months ago for $450, through Craigslist, which was a bargain. As you can see in Figure 7 that the 19 inch wheels look pretty good too.
Moreover, I also procured a pair of reclining racing bucket seats (Figure 9) made by Procar by Scat for about $280 on Facebook Marketplace. However, someone pointed out that these were knockoffs so I did feel a bit cheated! :( Oh well! These seats were in a Chevrolet Chevelle, so at least the brackets and sliders that came with it can be sold for something, and they look original since the part numbers are engraved on them.
To make myself happy, I decided to get the windows tinted on the car. I had been waiting for a while and feeling lazy to get it done and this Memorial day weekend I paid about $275 to get it done. 20% tint on the driver and passenger windows (Figure 8a), and 5% tint on the rear windshield (Figure 8b) and the strip on the front windshield (Figure 8c).Read More →
I went for an autocross in the Miata today in the Norther New Jersey SCCA (NNJR-SCCA) club at Metlife Stadium.
I found the course to be more difficult than the earlier courses and it had several sharp turns. My performance (Figure 3) was not as well as I had hoped as I came last in my class.Read More →
I procured the Porsche Boxster with a salvage title on Copart as described in an earlier post. The car had a big dent and a broken tail light and in the pre-COVID-19 pricing era, the insurance company decided to total it and sell it for salvage.
However, nothing much was wrong with it as you may have read in the several earlier posts and I fixed most of the dent and paid a mobile body shop to fix the rest. Once that was done, the car was ready to go through the process that is for converting a salvage title to a rebuilt title in the state of New Jersey. A rebuilt title is a clean or standard title with one of the fields mentioning that the car had a salvage title earlier. The process to get this is pretty simple but slightly expensive.Read More →
In an earlier post I demonstrated how to go about testing for coolant leaks. I initially detected a cracked hose but even after temporarily sealing it with JB Weld and conducting the pressure test again, the system still leaked at the same spot. After discussing with 986forum members, I decided to try changing the water pump, thermostat, replacing the main hoses near the engine and change the serpentine belt anyway. This would remove all the issues and would make the system as good as new. This post describes the water pump and thermostat replacement process.Read More →
To download the parts catalog of your favorite Porsche vehicle you can visit https://www.porsche.com/usa/accessoriesandservices/classic/genuineparts/originalpartscatalogue/ and select the model of your Porsche.
I selected the
Boxster (986) and
1997 - 2004 values in the form and hit the
DISPLAY button, as shown in Figure 1 below, which downloads a PDF.
I am mirroring the PDF here in case it disappears.
Moreover, I am also mirroring the radio CDR-220 manual here.Read More →